DIGITUS
®
KVM Switch Module for modular based TFT consoles
15
------------------------
Operation
Push-Buttons
A computer may be selected by pressing the push button directly, by issuing hotkey
commands or by activating the OSD window. The indicator changes to reflect the
computer port selected (red). The indicator flashes red when it is in either
Auto Scan
or
Manual Scan
mode.
Note:
For 16-port Modules:
1
~
8
represent the lower 8 ports and
A
~
H
for the
higher 8 ports. Push the same button twice for higher 8 ports, for example, push
button 1 twice for port
A
, and so forth. OSD menu and hotkeys are available for
computer selection.
n
K/M RESET
K/M RESET
solves most problems developed by keyboard, mouse, device
replacement, or change of configuration. Press down both the front-panel number
1
and
2
push-buttons for 2 seconds to re-configure the whole system without
turning either the DIGITUS® KVM Switch Module or any computer off.
n
AUTO SCAN
DIGITUS® KVM Switch Module provides an easy to use feature to start
Auto
Scan
ning. You can press down both the front-panel number
7
and
8
buttons
for 2 seconds to start Auto Scanning. For 4-port modules, press number
3
and
4
instead.
