DIGITUS
®
KVM Switch Module for modular based TFT consoles
25
Cascaded 8-Port DIGITUS® KVM Switch Modules
For OSD menu:
After connection completes, you should re-activate
the OSD menu to check if the
Master
recognizes the
Slaves
. A triangle mark (
4
) is placed to the right
of the channel name indicating the port is connected
to a
Slave
not
a computer. A number to the left of
the triangle mark indicates the
Slave
Module, i.e.
8
4
for an 8-port Switch Module.
Change Configuration while Running
A device (a computer or a KVM Switch Module) at any '
PC
x' port can be changed at
any time after initial power-up. If you change any one of the “
PC 1
” to “
PC 8
” ports
connection from a computer to a
Slave
or vice versa, or replace the devices of a
port; the OSD will update this change the next time it is activated.
Note:
Any new device must be turned off before it is connected to the Master.
