DIGITUS
®
KVM Switch Module for modular based TFT consoles
22
g
To select a computer by hotkey command, you must know its port number, which
is determined by the DIGITUS® KVM Switch Module connection. For a
computer connected to a
Master
, its port is represented by the PC port label (
1
~
8
or
A
~
H
). For a computer connected to a
Slave
, two characters represent its
port. The first character is the port number of the
Master
unit (
1
~
8
) and the
second one is the port number of the
Slave
(
1
~
8
or
A
~
H
). Please note that only
Master's
'
PC 1
' ~'
PC 8
' ports can be connected to a
Slave
.
Left
Ctrl
+
left
Ctrl
+
7
Selects a computer connected to port 7 of the
Master
.
Left
Ctrl
+
left
Ctrl
+
6
+
C
Selects a computer connected to port C of a
Slave
connected to port 6 of the
Master
.
g
To start
Auto Scan
, automatically scan power-on computers one by one at a fixed
interval:
Left
Ctrl
+
left
Ctrl
+
F1
When
Auto Scan
detects any keyboard or mouse activity, it suspends the scanning
till activity stops; it then resumes with the next computer in sequence. The length
of the
Auto Scan
interval (
Scan Rate)
is adjustable, see below. To abort the
Auto
Scan
mode, press the left
Ctrl
key twice.
Note:
Scan Type
determines whether an eye-marked computer is to be displayed
during
Auto Scan.
g
Manual Scan
enables you to manually switch back and forth between power-on
computers.
Left
Ctrl
+
left
Ctrl
+
F2
Press “
é
” or “
ê
” to select the previous or the next computer in sequence. And,
press any other key to abort the
Manual Scan
.
Note:
Scan Type
determines whether an eye-marked computer is to be displayed
during
Auto Scan.
g
To adjust
Scan Rate,
setting the duration before switching to the next computer in
Auto Scan
:
Left
Ctrl
+
left
Ctrl
+
F3
The DIGITUS® sends one to four beeps indicating scan interval of
3
,
8
,
15,
and
30
seconds respectively.
g
To adjust keyboard typematic rate (characters/sec), this setting over-rides that of
