Digitus DS-11210, User Manual

Page: 18 / 33

DIGITUS
®
KVM Switch Module for modular based TFT consoles
17
the number at the left of the triangle mark shows the number of ports the Slave has,
i.e. 8
4
for an 8-port Switch. ENTER key brings you one level down and another
screen pops up listing the names of the computers on that Slave . The name of the
Slave will be shown at the upper right corner of the OSD menu. It is useful to
group computers and still be able to see the group name.
An eye mark (
N
) to the right of a name indicating the computer is selected to be
monitored in Scan mode. In OSD, this mark can be switched on or off by function
key
F2 .
Press
ESC key to exit OSD and to return to the selected computer; the computer
name is also shown on the screen.
=
Function key F1 : To edit name entry of a computer or a Slave with up to
14 characters. First, highlight a port then press <F1> followed by name entry.
Valid characters are ‘
A’ ~’ Z’ , ‘ 0’ ~’ 9’ and the dash character. Lowercase letters
are converted to uppercase ones. Press BACKSPACE to delete a letter one
at a time. Non-volatile memory stores all name entries until you change, even if
the unit is powered down.
=
Function key F2 : To switch the eye mark (
N
)
of a computer on or off.
First, use the
é
and
ê
arrow keys to highlight it, and then press F2 to switch
its eye mark on or off. If Scan Type is ‘ Ready PC +
N
', only the power-on and
eye mark selected computers will be displayed sequentially in Scan mode.
=
Function key F3 : To lock a computer from unauthorized access. To lock
a device, highlight it then press F3 . Now, enter up to 4 characters (‘ A’ ~’ Z’ ,
‘ 0’ ~’ 9, ‘ -‘ ) followed by ENTER as new password. A Security-enabled device is
marked with a lock (
Ï
) following its port number. To permanently disable the
security function from a locked device, highlight it, press F3 then enter the
password.
If you want to access the locked device temporarily, simply highlight it and press
ENTER , the OSD will ask you for the password. After entering the correct
password, you are allowed to use the device. This device is automatically
re-locked once you switch to another port. During Scan mode, OSD skips the
password-protected devices.
=
Function key F4 : More functions are available by hitting F4 . A new
screen pops up displaying more functions as described below. Most of them are