DIGITUS
®
KVM Switch Module for modular based TFT consoles
30
Unable
to
operate
USB-ready Sun server.
Incorrect KVM Module.
Use only the hybrid PS/2 + USB KVM
Module.
Invoke the OSD menu, move the light bar
to the port, press
F5
to set the Sun
mark on.
Keyboard error on boot. Loose keyboard
connection.
Make sure keyboard cables are
Well seated.
Alphabets on the TFT
LCD display are blur or
have shadows.
Improper resolution
settings.
Set the VGA resolution of the computers
to 1024 x 768 with “Large Font” for the
best performance.
I forget the password.
Bad memory.
Consult the dealer.
Memorize the password.
Master/slave does not
work.
Improper installation
procedures.
Make
sure
slave’
s
CONSOLE
is
connected to
Master’
s
PC 1~ PC 8 port.
Only PS/2 ports can be used for cascade
connection.
Press and hold the
1
and
2
push-buttons to initiate K/M reset.
Remove any possible power supply to the
slave
(unplug
all
cables),
before
connecting it to the
Master.
Keyboard
strokes
shifted.
The computer was in
shifted state when last
switched.
Press both SHIFT keys.
The
é
and
ê
keys do
not work in
Manual
Scan.
All PCs are off or only one
PC is turned on. Scan
mode works for power-on
computers only.
Scan type
is eye mark
selected but no PC is eye
mark selected in OSD.
Turn computers on.
Press any other key to abort
Manual Scan
mode.
Set proper
Scan type
in OSD and
determine which PCs are eye mark
selected, do it in OSD.
Auto Scan
does not
switch
PC
and
DIGITUS® beeps from
time to time and red
indicator flashes.
All PCs are off or only one
PC is turned on. Scan
mode works for power-on
computers only.
Scan type
is eye mark
selected but no power-up
PC is eye mark selected
in OSD.
Turn on computers.
Set proper
Scan Type
in OSD and
determine which PCs are eye mark
selected, do it in OSD.
Press left
Ctrl
key twice to abort
Auto
Scan
mode.
Press any front button to select a PC, and
Auto Scan
stops.
