DIGITUS
®
KVM Switch Module for modular based TFT consoles
21
OSD Screen for USB+PS/2 Module and the Sun Mark
=
ESC
: To exit the OSD, press the
ESC
key.
Hotkey commands
Hotkey command is a short keyboard sequence to select a computer, to activate
computer scan, etc. DIGITUS® interprets keystrokes for hotkeys all the time. A
hotkey sequence starts with two left
Ctrl
keystrokes followed by one or two more
keystrokes. A built-in buzzer generates a high-pitch beep for correct hotkey
command; otherwise, one low-pitch beep for error and the bad key sequence will
not be forwarded to the selected computer.
The short form hotkey menu can be turned on as an OSD function (
F4
:
more\Hotkey Menu) every time the left
Ctrl
key is pressed twice.
L-Ctrl
: is the
Ctrl
key located at the left side of the keyboard.
1~8/A~H
: are the number keys '1' ~ '8' at the upper row of the keyboard and
character keys 'A' ~ 'H' case insensitive.
Do not use the keypad at
the right of the keyboard.
