78
2-7-1-3 Setup procedure for ‘AP Bridge-Point to Point’:
In this mode, you can connect your wireless router with another, to
combine two access points and expand the scope of wireless
network, and all clients (wired only – AP will not accept wireless
clients in this mode) of two wireless routers will think they’re on the
same physical network. This function is very convenient when you
need to connect two networks between two buildings. Here are
instructions about how to connect two wireless routers together:
2.4GHz AP Bridge (Point to Point) Settings
5GHz AP Bridge (Point to Point) Settings
NOTE: Two wireless routers must use the same mode, band, channel
number, and security setting!
1
2
3
4
5
1
2
3
4
5
