9
2-2 Connecting to wireless broadband router by web browser
After the network connection is built, the next step you should do is
setup the router with proper network parameters, so it can work
properly in your network environment.
Before you can connect to the router and start configuration
procedures, your computer must be able to get an IP address
automatically (use dynamic IP address). If it’s set to use static IP
address, or you’re unsure, please follow the following instructions
to configure your computer to use dynamic IP address:
If the operating system of your computer is….
Windows 95/98/Me
- please go to section 2-2-1
Windows 2000
- please go to section 2-2-2
Windows XP
- please go to section 2-2-3
Windows Vista
- please go to section 2-2-4
