122
3-2-5 UPnP Setting
This function enables network auto-configuration for peer-to-peer
communications, with this function, network devices will be able to
communicate with other devices directly, and learn about
information about other devices. Many network device and
applications rely on UPnP function nowadays.
Please click ‘NAT’ menu on the left of web management interface,
then click ‘UPnP’, and the following message will be displayed on
your web browser:
There is only one option in this page, please select ‘Enable’ or
‘Disable’ to enable or disable UPnP function, then click ‘Apply’
button, and the following message will be displayed on your web
browser:
Please click ‘Continue’ to back to previous setup menu; to continue
on other setup procedures, or click ‘Apply’ to reboot the router so
the settings will take effect (Please wait for about 30 seconds while
router is rebooting).
If you want to reset all settings in this page back to
previously-saved value, please click ‘Cancel’ button.
