Errors
ISOFLOW application – User manual for XeedSystem v1.6
|
31
8.2
Alerts
Various error can occur during seeding. The alert screen helps to trace and interpret these
errors.
Every error occurrence causes an alert
screen.
The alert screen draws the operator’s
attention every time a new error occurs
in the system.
On this screen the occurred errors can
be seen in priority order, and the errors
can be managed, in terms of future
alerts.
On the upper part of the screen a list of
the newly occurred errors can be seen,
which activated the alarm screen.
Below the alarm list, there is a legend for
the alarm screen and for it’s buttons.
Confirm button:
Confirm the errors and return to the seed monitoring view. It closes
the alert screen. The current and new errors will cause alerts again.
Error list button:
Opens the error list screen. The error list screen gives more
information about every error.
Ignore button:
Ignore every error similar to the current one on the given sensor. The
system won’t notify the user in case of similar errors on the similar sensor anymore.
(Until system restart.)
Ignore all button:
Ignore all errors in the future. The system won’t notify the user if
any error occurs. (Until system restart.)
In case of "Ignore" or "Ignore all", the system asks if the user really wants to ignore errors,
to avoid any unintentional or accidental error ignoring.
The ALERT screen will be displayed even if an another working set is active. In
another words, if an another machinery’s screen can be seen on the terminal.
IMPORTANT
The „Ignore” and „Ignore all” buttons only disable the appearing ALERT screen. The
errors will still be displayed on the main screen and in the alarm list.
IMPORTANT
