Header
ISOFLOW application – User manual for XeedSystem v1.6
|
25
7.3
The working position icon
In the middle of the header, the working position’ state can be seen. (lifted or working)
The lifted icon means that the machine is in lifted state.
The working icon means that the machine is in lowered state, it is in working
position.
If the seeder is in working position but the application displays lifted state or vica versa,
press the working position icon on the header to change the working position sensor’s
interpretation. Changing the interpretation changes the working position icon too.
The XeedGATE saves this option (the interpretation of the working position), so there is no
need to adjust it again.
7.4
The speed icon
The speed icon shows the speed of the seeder.
The speed value is crucial for the area measurement, so the precise speed
calibration is very important.
The speed calibration can be accessed on the machine settings screen.
7.5
The rate icon
The rate icon shows the applied rate of the seeds during sowing.
This is a calculated value from the seed, speed and machine attributes.
For precise applied rate calculation, calibrate the speed and set the seed
and machine values accurately.
