background image

© 2020 Digitrax, Inc. 

www.digitrax.com

3

1.0  Introduction

Congratulations on your purchase of a Digitrax UT6 family of throttles.  The 

UT6 is a LocoNet throttle with Digitrax IR untethered capability and the UT6D 

version has the same capabilities, with the addition of Digitrax Duplex teth-

erless operation.  Both Duplex and IR operations work with existing Digitrax 

compatible command stations, layouts and UR92, UR90 devices. 

There are other international versions of the Duplex throttle and this manual 

covers the complete family, since operations are consistent and similar.  The 

model ID is shown on the LCD screen at power on

To simplify operation the UT6 employs a color graphic LCD screen and a vari-

ety of cascading menus, up to five context-related soft keys and a built in con-

text-related help system that prompts available actions, or information on the 

side-scrolling HELP line.

This context HELP system prompting, coupled with a color LCD screen makes 

the UT6 very easy to use and a powerful layout control throttle.  You will not 

need to refer to a manual very often!

The UT6 throttle firmware can be downloaded and updated in the field using a 

PC running the free DigiIPL app and connected to a compatible Digitrax USB 

device.  The UT6 functions and screens may change with updates from the 

Digitrax Web site, so be sure to check the UT6 product pages to get the latest 

information and .dmf download files. 

The design of the Digitrax Complete Train Control

®

 system lets you operate 

your layout the way you choose. With LocoNet

®

 you simply connect system 

components to build the layout control system that you’ve always wanted!  

The Digitrax system reduces and simplifies layout wiring. 

There are many different combinations of Digitrax components that can be used 

to set up a layout control system that is right for you. You can combine Digitrax 

products with compatible decoders, boosters and computer software made by 

other companies that build compatible equipment.
Your success with & enjoyment of our products are very important to us.  After 

all, this is a hobby and it is FUN!!! Please read this manual carefully before 

using your product. There is additional information on this product and its oper-

ation at the 

www.digitrax.com

. web site.  We have included lots of hints and 

operating ideas based on our experience.  If you have questions not covered by 

this manual please contact your dealer or visit our web site at 

www.digitrax.

com

. The Digitrax on-line Tech Support Depot is always open, and support staff 

is ready to help on our Help Desk at: 

helpdesk.digitrax.com

.

Summary of Contents for UT6 Series

























Reviews: