manualshive.com logo in svg

DigiTech Vocalist Live FX, Owner'S Manual

Share
Download
DigiTech Vocalist Live FX Owner'S Manual Download Page 9

Owner's Manual

3

Features

•  Studio-Grade Mic Preamp, Vocal Processing, & Effects
•  +48V Phantom Power
•  dbx

®

 Compression & Advanced Feedback Suppression

•  Lexicon

®

 Ambience & Reverb

•  Latest musIQ

®

 Technology & Built-In Analysis Mic

•  Live Adapt™ for Real-Time Adaptive Control of Noise Gating, Pitch Effect Key, 

Harmony Key, & Effect Tempo

•  Sound Check Feature for Auditioning & Quick Setup of Effects 
•  70 Second Mono Phrase Looper (35 Seconds w/Undo)
•  99 User & 99 Factory Presets
•  24-bit/44.1kHz Audio Quality
•  Easy-To-Read Backlit LCD Display
•  USB Port for Firmware Updates & Preset Management
•  Vocalist Live Librarian Software for Mac & PC

Important Firmware Update Info! 

This version of the manual was revised to include feature enhancements released in 

firmware version 1.1 and DSP version 1.3. If you have a Live FX device with older 

firmware installed, please visit 

digitech.com/en-US/software

 to download the lateset 

version of the Vocalist Live Librarian software application. Once installed, launch the 

Vocalist Live Librarian software to update the firmware in the device. To check the 

currently installed version of firmware in a Live FX device, press the <SYSTEM> 

button – the current firmware (FW) version will be displayed in the upper right-

hand corner of the LCD display.

Summary of Contents for Vocalist Live FX













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands