DigiTech Vocalist Live FX Owner'S Manual Download Page 72

Page: 72 / 76

Owner's Manual

Preset Librarian Software

You can backup Live FX presets and set lists using the free Vocalist Live Librarian

preset management software application for PC and Mac. The Vocalist Librarian

software can be downloaded from digitech.com. This software will connect to the

Live FX through the mini USB connector and allows you to archive and retrieve

presets and set lists to and from your computer.

System Requirements & Download

To download the Vocalist Live Librarian preset management software and get the

latest information on system requirements, visit the downloads section at

http://

www.digitech.com/en-US/products/live-fx

Firmware Updates

Firmware updates are performed using the Vocalist Live Librarian software

application. Firmware updates can be performed using a Mac or Windows computer

with a compatible USB 2.0 or higher connection.

Summary of Contents for Vocalist Live FX













































































Search results

Summary of Contents for Vocalist Live FX

Reviews:

Brands by name

Popular brands

DigiTech Vocalist Live FX, Owner'S Manual

Search results

Summary of Contents for Vocalist Live FX

Reviews:

Brands by name

Popular brands