manualshive.com logo in svg

DigiTech Vocalist Live FX, Owner'S Manual

Share
Download
DigiTech Vocalist Live FX Owner'S Manual Download Page 21

Owner's Manual

15

To reset a Gold Channel Type back to its factory default settings:
1.  Press and hold the <Gold Channel>  button. The  <Gold Channel> button 

will begin flashing and the LCD display will now display the Gold Channel effect 

parameters.

2.  Turn the <DATA> encoder until you have selected the TYPE you wish to 

reset. If the selected TYPE has been modified from the default settings, the 

display will read "TYPE-MODIFIED".

3.  Press the <DATA> encoder as many times as it takes to get to page 3 of 

3 (3/3) in the Gold Channel menu. Once you are on page 3, you will see the 

RESET parameter in the bottom right-hand corner of the LCD display.

4.  Turn the <Edit 4> knob to initiate the reset procedure.
5.  A prompt will be displayed, allowing you to confirm or cancel the operation. 

Turn the <Edit 3> knob to select "Yes" and confirm the type reset procedure. 

Turn the <Edit 2> knob to select "No" and cancel the operation.

Summary of Contents for Vocalist Live FX













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands