Owner's Manual
9
Connection Diagrams
Cable Diagrams
Stereo Connection to Live FX Aux In
Use a cable like this when connecting a stereo 1/4" feed to the Live FX's Aux In jack.
1/8" Stereo TRS to Dual 1/4" TS Cable
Left
Channel (+)
Right
Channel (+)
Ground
Left
Channel
Right
Channel
Ground
Ground
Left +
Left +
Right +
Right +
Ground
Aux
In
Input
Gain
Mic In
Left Out
Right Out
USB
Line Out
Footswitch
9VDC 800mA
Manufactured under U.S. patent number: 8,168,877 B1
NOTE:
You can also use the above cable when connecting a mono signal to the
Aux In jack–such as when connecting an aux send or direct output from the
mixing console. This type of connection could be used to send a "guitar only"
signal to the Live FX for use with Live Adapt. Simply use only one of the 1/4"
plugs and leave the other disconnected.
Stereo Connection from Live FX Line Out
Use a cable like this to connect the Live FX's 1/4" Headphone/Line Output to the
1/4" line inputs of another device.
Aux
In
Input
Gain
Mic In
Left Out
Right Out
USB
Line Out
Footswitch
9VDC 800mA
Manufactured under U.S. patent number: 8,168,877 B1
1/4" Stereo TRS to Dual 1/4" TS Cable
Left
Channel (+)
Right
Channel (+)
Ground
Ground
Left +
Right +
Left
Channel
Right
Channel
Ground
Left +
Right +
Ground
NOTE:
Connecting a mono TS cable to the 1/4" stereo Headphone/Line Output
jack is not recommended. If you require a single mono feed from the 1/4" stereo
Headphone/Line Output, it is recommended that you use a stereo cable as shown
above and use only one of the TS plugs, leaving the other disconnected. You will
then need to turn STEREO mode off in the System Edit menu (see
"Stereo" on
page 33
).
Summary of Contents for Vocalist Live FX
Page 1: ...Owner s Manual ...
