manualshive.com logo in svg

DigiTech Vocalist Live FX, Owner'S Manual

Share
Download
DigiTech Vocalist Live FX Owner'S Manual Download Page 45

Owner's Manual

39

Factory Reset

This system parameter restores all system settings and user presets to their factory 

default state.

WARNING! 

Performing the Factory Reset procedure will delete stored presets. It 

is recommended that you backup presets using the Vocalist Live Librarian preset 

management software before performing this procedure.

To initiate the Factory Reset procedure:
1.  Press the <System> button. 
2.  Press the <DATA> encoder four times to navigate to page 5 within the 

System Edit menu. 

3.  Turn the <Edit 1> knob to initiate the Factory Reset procedure. 
4.  You will receive a confirmation prompt. Turn the corresponding <Edit> knob 

to make your selection;  "Yes" to proceed with Factory Reset, "No" to cancel 

the procedure. If confirmed, the Factory Reset procedure will be performed 

then the LCD display will return to displaying the currently loaded preset.

Summary of Contents for Vocalist Live FX













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands