Owner's Manual
42
Warmth
Press & Hold To Edit
Warmth adds varying amounts of tube saturation to your vocals. Use Warmth when
your vocals require some additional grit, warmth, and character.
Available parameter:
• WARMTH (0-99)
This parameter adjusts the amount of tube saturation applied, with 0 being the
minimum (no effect) and 99 being the maximum.
To dial in the Warmth effect:
1. Press and hold the <GOLD CHANNEL> button to edit the effect.
2. Sing into the microphone (or use the Sound Check feature, see
"Sound Check"
on page 18
) and raise the WARMTH parameter until the desired effect level
is achieved. Just a little of this effect goes a long way.
NOTE:
The Warmth effect becomes more noticeable as your vocal level increases.
To properly set the desired Warmth amount, make sure your microphone gain is
set correctly and that your auditioning vocal passage contains sections that are
loud enough to enable you to hear the effect at its most prominent.
Summary of Contents for Vocalist Live FX
Page 1: ...Owner s Manual ...
