manualshive.com logo in svg

DigiTech Vocalist Live FX, Owner'S Manual

Share
Download
DigiTech Vocalist Live FX Owner'S Manual Download Page 46

Owner's Manual

40

 The Effects & Parameters 

The Live FX signal path is a serial chain of 8 effect modules, which correspond to 

the 8 buttons along the top of the Live FX’s user interface. 

The “Gold Channel” effect module is the first module in the signal chain and 

comprises a grouping of 8 channel strip style effects (Warmth, Compressor, Noise 

Gate, Low Cut, EQ, De-Esser, Ambience, and Pitch Correction). These Gold Channel 

effects provide the sonic foundation for your vocal sound and are used globally for 

all presets. 

The remaining 7 effect modules (Pitch FX, Distortion/Filter, Harmony, Doubler, 

Modulation, Delay, and Reverb) are all programmable within each preset and are 

referred to as the “Vocal” effects. This section of the manual describes each of these 

effects, their associated parameters, and tips for dialing in these parameters. If you 

are unsure how to navigate menus and edit the effect parameters, see 

"Operating 

The Live FX" on page 14

.

Summary of Contents for Vocalist Live FX













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands