manualshive.com logo in svg

DigiTech Vocalist Live FX, Owner'S Manual

Share
Download
DigiTech Vocalist Live FX Owner'S Manual Download Page 23

Owner's Manual

17

Effects Bypass

During performance there will be times when you want to bypass all effects 

when speaking to the audience between songs. The Live FX has a global Effects 

Bypass which will bypass all Vocal effects (Pitch FX, Dist/Filter, Harmony, Double, 

Modulation, Delay, and Reverb) in the currently active preset. Effects Bypass only 

bypasses specific Gold Channel effects (i.e., Pitch Correct, Ambience, and Noise 

Gate).

To bypass/enable all Vocal effects:
1.  Press and hold the <Up> footswitch until the LED above the footswitch lights 

and the display reads, “EFFECTS BYPASSED”.

2.  Press any footswitch or effect button to exit the Effects Bypass function and 

re-enable the Vocal effects.

Anti-Feedback (dbx

®

 AFS)

The Live FX uses dbx AFS

®

 (Advanced Feedback Suppression) to actively monitor 

and kill feedback before it becomes a problem. In live situations where feedback 

is possible, enable AFS by simply pressing the <Anti-Feedback> button – the 

button will turn green, indicating the Anti-Feedback feature is active. The Anti-

Feedback button has three states to let you know it’s working, they are:

•  Green LED 

Indicates the AFS feature is enabled. 

•  Yellow LED 

Indicates AFS is actively notching feedback frequencies. 

•  Red LED 

Indicates all AFS filters have been set. When all filters have been set and a new 

feedback frequency occurs, AFS will release the first set AFS filter in order to 

place it at the new feedback frequency location. If this condition persists, it is 

an indicator that the system gain is too high and it is recommended that the 

gain be reduced and the AFS filters cleared to alleviate the issue. AFS filters 

can be cleared by simply pressing the <ANTI-FEEDBACK> button twice 

(once to disable Anti-Feedback and again to re-enable it). AFS filters are also 

cleared when the Live FX is power cycled.

Summary of Contents for Vocalist Live FX













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands