Digital View DVR-810, Owner'S Manual

Page: 54 / 78

50
The Main Menu The Main Menu
51
11. Use the
Å
or
Æ
buttons to change the
HD
Aspect Ratio . The picture changes while each
of the three aspect ratio options is selected.
12. Press ENTER to change to the new SD Aspect
Ratio
.
13. Press the EXIT button to clear any menus and
return to normal viewing.
TV Settings – Video Format
The Video Format settings allow you to change
the video resolution and video connection that
may be required by your TV/Monitor. The factory
default video resolution is set to 1080i. The video
connection type is YPbPr (Component Video).
Note:
•
If Native is selected in Video Format,
the program video will be output at the
resolution that is determined by that
specific broadcaster. In this case the TV/
Monitor that is used must support all video
resolutions, i.e. 576I, 576p, 720p and 1080i.
If you need to change the default video
resolution or video connection type:
1. Select
Setup
from the
MAIN MENU
and press
ENTER.
2. Select
TV Settings
using the Ç or È buttons.
3. Select
Video Format
using the Æ and È
buttons and press ENTER. The Set option is
highlighted.
4. Press ENTER. The
Video Format
of 576p 50 is
highlighted.
5. Press the Å or Æ buttons to select the video
resolution required and press ENTER.
6. To change the video connection type select
Analog Output.
Analog Output
is highlighted.
7. Press the Å or Æ buttons to select the type
of video connection required and press ENTER.
8. Press the EXIT button to clear any menus and
return to normal viewing.