Digital View DVR-810, Owner'S Manual

Page: 26 / 78

22
Operational Introduction Operational Introduction
23
Operational Introduction
Operational Introduction
This Introduction is intended to get you started and using the DVR-810 as quickly as possible. Even with
its advanced functionality, the DVR-810 is very easy to operate and in most cases will not require any
further setup. This section assumes that you have already connected your DVR-810 to your TV monitor
and/or Entertainment System. If not, please refer to the preceding section on “
Installation and Setup
”
together with any information related to other equipment in your system.
Once you are familiar the basic operation of the DVR-810 and want to explore the extended features,
refer to
The MAIN MENU section of this manual.
Using the STBY Button
The STBY (Standby) button is used to switch the DVR-810 into a low power operational mode. If while
recording, or in the event that any scheduled recordings have been set, the DVR-810 will continue to
operate normally. In all cases video and audio outputs are switched OFF.
The following is a five step Tutorial on how to use your DVR-810. The topics covered include:
1. Tuning The DVR-810 for Digital TV Reception
2. Watching Live TV and Changing Channels
3. Recording Using - On-Demand, Timer, EPG or Timeshifting
4. Playback
5. Transport and Trick Control Modes