Digital Projection Mercury Quad Series, Installation And Quick Start Manual

Page: 33 / 130

page 25
Digital Projection Mercury Quad Series
Connection Guide
SIGNAL INPUTS
Rev A March 2017
Signal Inputs
1
HDBaseT
Receives digital signal from HDBaseT-compliant devices.
2
HDMI I
HDMI 1.4a input. Connect an HDMI cable to the connector.
3
HDMI II
HDMI 1.4a input. Connect an
HDMI
cable to the connector.
4
DisplayPort
DisplayPort 1.1a input. Connect a DisplayPort cable to the connector.
Supports sources up to 1920x1200 resolution, 24-120 Hz. Supports HDCP.
5
3G-SDI in / out
Connect the IN socket to a 3G-SDI source.
Connect the OUT to distribute the 3G-SDI signal to another projector.
Notes
For simultaneous HDBaseT and
LAN connectivity, a third-party
distribution product can be utilised
to combine HDBaseT video stream
with LAN connection for delivery to
the projector.
The projector can receive
100/120Hz and display 3D at
100/120Hz.
For a complete listing of all
supported signal input modes, see
Appendix B: Supported Signal
Input Modes
in the
Reference
Guide
.
For a complete listing of pin
configurations for all signal and
control connectors, see Appendix
C: Wiring Details in the Reference
Guide .
1
2 3 4 5