Digital Projection Mercury Quad Series, Installation And Quick Start Manual

Page: 26 / 130

page 18
Digital Projection Mercury Quad Series
Installation and Quick-Start Guide
CHANGING THE FILTERS
Rev A March 2017
Rear filter
1. Loosen the captive screws
1
and
2
.
2. Remove the filter compartment cover.
3. Change the filter: slide the old filter out as shown in
the illustration, then push the new filter in.
4. Return the cover back in its place and fasten the
screws to lock it into position.
1
2
Notes
Before changing the filters,
always make sure the projector
is switched off and fully
disconnected from its power
supply.
When changing the filters, avoid
using excessive force as this may
damage the equipment.
In a normal environment the filters
should be changed every 2500
hours.