Digital Projection Mercury Quad Series, Installation And Quick Start Manual

Page: 49 / 130

page 41
Digital Projection Mercury Quad Series
Operating Guide
USING THE PROJECTOR
Rev A March 2017
Image menu
•
Gamma
Choose a de-gamma curve from
1.0
,
1.8
,
2.0
,
2.2
,
2.35
and
2.5
.
Used correctly, the
Gamma
setting can improve contrast while maintaining good
details for blacks and whites.
If excess ambient light washes out the image and it is difficult to see details in dark
areas, lower the
Gamma
setting to compensate. This improves contrast while
maintaining good details for blacks. Conversely, if the image is washed out and
unnatural, with excessive detail in black areas, increase the setting.
•
Brightness, Contrast, Saturation, Hue, Sharpness
Highlight the setting you wish to edit, and then press
ENTER/OK
, or the
LEFT
or
RIGHT
arrow button to open the slider.
Use the
LEFT
and
RIGHT
arrow buttons to adjust the slider.
Press
EXIT
to close the slider and return to the menu, or
MENU
to close the slider
and return to the projected image.
•
Noise Reduction
This item opens a sub-menu, see next page.
•
Freeze
Freezes the current frame.
Press again to unfreeze.
•
Resync
Press
ENTER/OK
to force the projector to resynchronise with the current input.
Notes
Some settings may be unavailable
depending on other settings. For
more information, see Possible
Combinations Of Settings further
in this guide.
Image
Gamma
Brightness
Saturation
Hue
Contrast
Sharpness
Position and Phase
Freeze
Noise Reduction
2.2
u
u
Resync
100
100
100
100
0