Digital Projection
E-Vision 6500 Series
LAN Control Utility
Remote Communications Guide
58
Rev D July 2014
LAN Control Utility
The
LAN IP Address
of the projector can be set by using the
Network
submenu, which can
be found in the
Advanced Setting
submenu in the
Installation
menu.
Once the LAN IP Address has been set, it is possible to control some basic functions by
using the emedding LAN Control Utility:
•
Point your browser at the projector by typing the url
http://<LAN IP Address>/index.html
into the address bar, then press the
Enter
key.
•
The embedded webpage shown here should appear.
Power ON/STANDBY
Click on the buttons to turn the projector
On
or into
Standby
mode.
Picture controls
Click on the
and
controls to adjust the settings as required.
Input Select
Click on the
Input
buttons to switch to the required input.
AV Mute
Click to switch video
On
or
Off
.
Status
The panel shows the status of the lamps and filters. Click on the
Refresh
button to update the readings.
Notes
For full details of how to use the
menu system, see the
Operating
Guide
.
The lamp life percentage shown
here is based on expected lamp life
in controlled laboratory conditions.
Actual life may vary depending on
installation environment, orientation
and lamp mode (
Normal
or
Eco
).”
