Digital Projection
E-Vision 6500 Series
A Tour Of The Menus
Operating Guide
Page 41
Rev D July 2014
Installation menu
Language
•
Select a language as required.
Lamp Control
•
Set this to
Both
,
Lamp1
,
Lamp 2
or
Auto 1
as required.
Lamp Mode
•
Set this to
Normal
or
Eco
as required.
Projection Mode
•
Set this to
Front
,
Rear
,
Front
or
Rear
as required.
Fan Mode
•
Set this to
Normal,
High
or
Up & Down
as required. Select
High
to compensate for reduced air density at higher altitudes. Select
Up & Down
if the projector is positioned at an upward or downward angle.
Test Pattern
•
Select a Test Pattern from the list.
Notes
See also
Using the Menus
, earlier
in this guide and
Menu Map
, later in
this guide.
When Lamp Control is set to
Auto 1
, the projector will turn on
using the lamp with the least hours
of use.
