Digital Projection
E-Vision 6500 Series
Changing The Lens, Lamps And Color Wheel
Installation and Quick-Start Guide
8
Rev D July 2014
Changing the color wheel
1. Slide open the lamp compartment cover as shown in the picture.
2. Unscrew the four captive screws securing the color wheel.
3. Remove the color wheel.
4. Insert a new color wheel.
5. Fasten the screws.
6. Replace the lamp compartment cover.
4
5
6
3
2
1
Notes
Always allow the lamp to cool for
5 minutes before:
- disconnecting the power
- moving the projector
The color wheel must be changed
only by suitably qualified
personnel.
The projector will shut down if the
cover is opened whilst in operation.
