Digital Projection
E-Vision 6500 Series
Changing The Lens, Lamps And Color Wheel
Installation and Quick-Start Guide
7
Rev D July 2014
Changing the lamp
1. Slide open the lamp compartment cover as shown in the picture.
2. Unscrew the two captive screws securing the lamp module.
3.
Pull firmly upwards on the handle to remove the lamp module.
4. Insert a new lamp module.
5. Fasten the screws.
6. Replace the lamp compartment cover.
1
2
3
Notes
Always allow the lamp to cool for
5 minutes before:
- disconnecting the power
- moving the projector
The lamp must be changed only
by suitably qualified personnel.
The projector will shut down if the
cover is opened whilst in operation.
The filters should be changed at the
same time as the lamp is changed.
4
5
6
