Digital Projection
E-Vision 6500 Series
Wiring Details
Connection Guide
20
Rev D July 2014
Computer 3 video input: DVI-D
24 way D-type connector
1
TMDS Data 2-
2
TMDS Data 2+
3
TMDS Data 2 Shield
4 unused
5 unused
6
DDC Clock
7
DDC Data
8 unused
9
TMDS Data 1-
10
TMDS Data 1+
11
TMDS Data 1 Shield
12 unused
13 unused
14
+5 V Power
15
Ground
16
Hot Plug Detect*
17
TMDS Data 0-
18
TMDS Data 0+
19
TMDS Data 0 Shield
20 unused
21 unused
22
TMDS Clock Shield
23
TMDS Clock+
24
TMDS Clock-
* Hot plug detect (HPD) is fully DVI compliant. DVI sources detect the presence of a display
device by pro5V on pin 14 and looking for +5V on pin 16. Whenever the projector is
operational, and 5V is present on pin 14, pin 16 will be held at +5V.
EDID is available even when the projector is switched off.
Operational means that the projector is powered up. Non operational states are powered
down and some self test and reprogramming modes.
High Definition Content Protection (HDCP) is supported on this input.
Notes
For full details of all input settings,
see the
Advanced menu
in the
Operating Guide
.
pin view of female connector
