Digital Projection
E-Vision 6000 Series
A TOUR OF THE MENUS
Operating Guide
46
Rev D July 2014
Information menu
The information menu is arranged in four tabs:
Usage time
,
Input
,
Network
and
Version
.
Usage time tab
Displays information about lamp usage, projector running time and filter time.
Input tab
Displays information about the active source.
Network tab
Displays network information.
Version tab
Displays the model name and firmware version.
Reset menu
The
Reset
menu allows you to restore factory default settings. You can
choose to reset the following:
•
Current signal
All items in the
Adjust
menu can be reset.
•
All data
Resets all settings apart from
Language
,
Background,
Key lock
,
Security
,
Network mode
,
Communication speed
,
Lamp life
remaining
,
Lamp time
and
Filter time
.
•
Clear lamp1 time
,
Clear lamp2 time
and
Clear filter time
Use when replacing lamps or cleaning the filter.
To reset any of the above settings:
1. Select one of the options and click
ENTER
.
2.
In the confirmation dialog, select
OK
and click
ENTER
again to confirm
your choice.
Notes
The lamp life percentage shown
here is based on expected lamp life
in controlled laboratory conditions.
The actual life may vary depending
on installation environment,
orientation and lamp mode (
Normal
or
Eco
).
Network settings are configured
in the
Network setting
menu. Go
to the
Setting > Installation >
Network setting
.
Information
Usage time
Input
Network
Version
Usage time
Lamp1 life remaining
50%
Lamp2 life remaining
50%
Lamp1 time
1000[H]
Lamp2 time
1000[H]
PJ time
1000[H]
Filter time
1000[H]
Reset
Current signal
All data
Clear lamp1 time
Clear lamp2 time
Clear filter time
Are you sure?
!
OK
Cancel