Digital Projection
E-Vision 6000 Series
CONTROL CONNECTIONS
Connection Guide
20
Rev D July 2014
Control Connections
Screen Trigger
•
The Trigger output can be connected to an electrically operated screen,
automatically deploying the screen when the projector is switched on, and
retracting the screen when the projector is switched to standby.
USB
•
The USB port is used to download firmware updates, issued from time to
time by Digital Projection.
Serial Port
•
The projector’s features can be controlled via a serial connection, using the
control strings described in the
Remote Communications Guide
.
LAN (
)
•
The projector’s features can be controlled via a LAN connection, using
the industry standard
PJLink
commands. The PJLink specification can be
downloaded from
http://pjlink.jbmia.or.jp/english
- click on the
Specifications
link.
•
The LAN IP Address of the projector can be set by using the
Network
submenu, which can be found in the
Advanced Setting
submenu in the
Installation
menu.
•
Once the LAN IP Address has been set, it is possible to assign a
Host
Name
and
Domain Name
to the projector, and to set up an
Alert Mail
address and
PJLink
password.
•
A number of basic picture and input settings can be controlled directly using
the embedded
LAN Control utility
.
LENS SHIFT
ZOOM
–
FOCUS
+
MENU
ENTER
RETURN
SOURCE
POWER
WARNING
LAMP1
LAMP2
AU
TO
Notes
For a complete listing of pin
configurations for all signal and
control connectors, see
Wiring
Details
later in this Guide.
Only one remote connection can
be used at any one time. For more
information, see the
Installation
menu
in the
Operating Guide
.
When
Standby Mode
is set to
Power-saving
, the
LAN
connection
is disabled.
For more information about
PJLink settings, see the
Remote
Communications Guide
.
For full details of how to use the
LAN Control Utility
, see the
Remote Communications Guide
.
Connection Panel
