Digital Projection
E-Vision 6000 Series
A TOUR OF THE MENUS
Operating Guide
42
Rev D July 2014
Notes
Setting menu
Installation tab
The
Communication speed
setting
is not available if
PC control
is set
to
Network
.
Make a note of your password
and keep it safe. If you are
unable to retrieve the password,
the projector can no longer be
started. Contact your dealer for
assistance.
Key lock
does not affect the remote
control.
DynamicBlack
reduces the overall
light output for images that contain
a lot of black. This improves the
perceived contrast ratio.
Setting menu
continued...
Installation tab
•
Ceiling & Rear
Desktop
is for a unit standing on its feet; set to
Ceiling
if the projector is
mounted upside down.
Front
and
Rear
define whether the projector is in
front of the screen or behind it.
Select as required from
Desktop Front
,
Desktop Rear
,
Ceiling Front
and
Ceiling Rear
.
•
Communication speed
Sets the Serial Port (RS232) baud rate. Longer cable connections may
require lower speeds.
•
Display time
Sets the amount of time a menu is displayed on the screen.
•
Background
Defines what appears on the screen when there is no input signal.
•
PIN code lock
When the PIN code lock is enabled, a security password will need to
be entered before the projector can be used, or before the lock can be
disabled.
When setting the lock for the first time, the password needs to be
entered twice, to ensure that it is correct.
The password is a combination of the
LEFT
,
RIGHT
,
UP
and
DOWN
arrows, between four and ten characters long.
•
Key lock
Enable this setting to lock the control panel. To unlock the control panel,
press and hold
RETURN
for ten seconds.
•
DynamicBlack
Set to
On
or
Off
as required.
Setting
Basic
Installation
Option
Installation
Ceiling & Rear
Desktop front
Communication speed
4800bps
Display time
Auto 5 sec
Background
Blue
PIN code lock
Off
Key lock
Off
DynamicBlack
Off
RC sensor
Both
Network setting
Standby mode
Normal
PC control
PC control
