Digital Projection
E-Vision 6000 Series
OPERATING THE PROJECTOR
Installation and Quick-Start Guide
14
Rev D July 2014
Adjusting the image
Orientation
1. Press
MENU
and from the list of options that appears on the screen, select
SETTING
.
2. On the
INSTALLATION
tab, open the
CEILING & REAR
setting, then select the desired image orientation. (Choose from
Desktop Front
,
Ceiling Rear
,
Desktop Rear
and
Ceiling Front
.)
Aspect Ratio
1. Press
MENU
and from the list of options that appears on the screen, select
ADJUST
.
2. On the
IMAGE OPTIONS
tab, open the
SCREEN
setting, then select the desired screen aspect ratio. (Choose from
4:3
,
16:9
,
16:10
,
Letterbox
,
True
and
Normal
.)
Picture
1. Press
MENU
and from the list of options that appears on the screen, select
ADJUST
.
2. On the
IMAGE
tab, access various picture settings, such as
Brightness
and
Contrast
.
Switching the projector off
1. Press
on the control panel or
STANDBY
on the remote control, then press the button a second time within 5 seconds to confirm your
intention to switch off.
The lamp will switch off, and the
Power
indicator on the control panel will flash amber for a few seconds whilst the lamp cools. The
Power
indicator on the control panel will then show amber and the
Warning
indicator will show green. The projector will be in
Standby
mode.
2. Switch off at the switch next to the power connector. Disconnect the power cable from the projector.
Notes
Always allow the lamp to cool for
5 minutes before:
- disconnecting the power
- moving the projector