Digital Projection
E-Vision 6000 Series
A TOUR OF THE MENUS
Operating Guide
45
Rev D July 2014
Setting menu
continued...
Option tab
•
Power management
Set the amount of time the projector will remain on without an input
source before going into standby mode.
•
Screen trigger
Set this to
On
to enable the screen trigger.
•
Fan control
Max
increases the fan speed to compensate for reduced air density at
high altitude.
•
Default input select
If
Default input select
is set to
Auto
, the projector will cycle the inputs
until a source is detected. If set to
Last
, the default input will be the last
used.
•
Color system
Choose the color system for Video and S-Video. Select from
Auto
,
NTSC
,
PAL
and
SECAM
.
•
Message
If you do not want projector status messages to be displayed, set
Message
to
Off
.
•
Filter warning
Choose a
Filter warning
time interval from the list, or select
Off
.
•
Search mode
Notes
Setting menu
Option tab
Setting
Basic
Installation
Option
Option
Power management
Off
Screen trigger
Off
Fan control
Max
Default input select
Last
Color system
Video
Auto
S-Video
Auto
Message
Off
Filter warning
Off
Search mode
Fine
