Testing System Components
Requesting a
Test Summary
When the test finishes, the system exerciser displays the
following question, asking if you want to see a summary display
of the system test:
SYT_DISPLY_SMRY (’1’ = Y)
If you answer 1 (yes), the system displays a test summary. The
summary, shown in Figure 5–5, always begins with the graphics
device. To see the display of each subsequent device, press the
Return key.
Figure 5–5 Test Summary Display With Error
MLO-008497
**********FST ext_errpt 21cg 0:00:02:03**********
LCSPX error summary - Pass count = 00000005
----------------------------------------------------------
error code 06A 010 0003
checker board address expect read
----------------------------------------------------------
vram error
main mem error
----------------------------------------------------------
3
4
1
2
!
Error location (two lines)
"
Drive number
#
Test expected to read this code
$
Test actually read this code
5–14 Testing System Components