Using Console Commands
Using Console Commands
The commands that you enter at the console prompt (>>>) let
you display information about your system, as well as set and
test certain components.
Using HELP
To see a list of the console commands, enter HELP at the console
prompt (>>>) and press the Return key.
SHOW
Commands
Table 4–2 lists the information you can display with each SHOW
command.
Table 4–2 SHOW Commands
If you want to know:
Enter this command:
The default boot flag
SHOW BFLG
The default boot device
SHOW BOOT
The system configuration
SHOW CONFIG
The boot devices available
SHOW DEVICE
Extended error information
SHOW ERROR
The status of system exerciser tests
SHOW ESTAT
The hardware Ethernet address
SHOW ETHER
Which default startup tests to perform
SHOW FBOOT
The system’s default recovery action
SHOW HALT
The keyboard language selected
SHOW KBD
How much memory your system has
SHOW MEM
If the password enable bit is on
SHOW PSE
The SCSI bus host ID number
SHOW SCSI
Using Your System 4–7