A-2 Problem-Solving Using the LEDs
LED Descriptions
The LEDs on the front of the module provide dynamic indications of
module status. Flashing LEDs indicate special situations. Refer to Figure
1-1 in Chapter 1 to see the LED locations on the RouteAbout 90 EW.
Table A-1 shows the states that are possible for each of the module
LEDs.
Table A-1 Module LED States
LED Name
Off
On
Flashing
Power
No power to
Module.
Module receiving
power.
Faulty power
connection or
insufficient power.
Module
OK
Self-test failed.
Module passed
self-test
N/A
Network
OK
ThinWire 10Base2
port or twisted
pair 10BaseT port
is not connected
to a properly
terminated and
operational LAN.
ThinWire 10Base2
port or twisted
pair 10BaseT port
is connected to a
properly
terminated and
operational LAN.
N/A
Network
Activity
No network
activity.
There is heavy
traffic on the
network.
Flashes more
rapidly and
appears brighter
as network traffic
increases.
Serial Line
1 or Port 2
OK
Indicates self-test
failure.
Indicates normal
operation.
Indicates self-test
mode.
Serial Line
1 or Port 2
Activity
No traffic on the
port.
There is traffic on
the port.
Flashes more
rapidly and
appears brighter
as network traffic
increases.
Summary of Contents for RouteAbout Access EW
