Digital Equipment RouteAbout Access EW, Installation Manual

Page: 36 / 80

2–16 Installing the RouteAbout Access EW
Figure 2-10 Cable Connection
After the module is successfully installed, the DEChub 900 MultiSwitch
message screen, or MAM, will read:
RtAbt Acces EW/MP
up
This message means that the DEChub 900 MultiSwitch only recognizes
the presence of the module. It does not mean that the module is ready to
run.
After successful installation and power-up, configuration information
will appear on the hub manager screen and, if connected, on the module
console. Included will be questions about your network topology. Refer to
Chapter 3, RouteAbout Access EW Set-Up, for further guidance on how
to set up your module.