Installing the RouteAbout Access EW 2–13
Task 2:
Seat the Module
To seat the module into the DEChub 900 MultiSwitch, complete the
following steps. Refer to Figure 2-8.
Step
Action
1
Place the module’s mounting tab
into a mounting slot on the
DEChub 900 MultiSwitch.
2
Pull up on the release lever
to its unlocked position.
3
Pivot the module on the mounting tab and align the connectors.
4
Firmly push the module onto the backplane connectors.
5
Press down on the release lever
to ensure that it is locked.
Figure 2-8 Seating the Module in the DEChub 900 MultiSwitch
Summary of Contents for RouteAbout Access EW
