Digital Equipment Pro-Face PL-6700 43 Series, User Manual

Page: 60 / 97

Chapter 5 - System Setup
PL-6700 43 Series User’s Manual 5-7
Selecting the POWER MANAGEMENT SETUP menu item calls up the
following screen.
Power Management
You can choose from four power management options. These are [User
Defined],[Disabled], [Min Saving] or [Max Saving]. The [Disabled]
selection is factory set and recommended for most users.
PM Control by APM
Designates if the power management is controlled by the APM. The two
selections available are [Yes]or [No]. The [Yes] selection is factory set
and recommended for most users.
Video Off Option
Turns the PL-6700's display OFF. The selections include [Always on],
[Suspend
→
Off], [Susp,Stby
→
Off] and [All Modes
→
Off].
Video Off method
When Auto Configuration [Enabled] has been selected, this selection cannot
be used.
Doze Speed (div by)
Selections for this feature include [1],[2],[3],[4],[5],[6],[7]or[8]. The [2]
selection is factory set and recommended for most users.
Stdby Speed (div by)
Selections for this feature include [1],[2],[3],[4],[5],[6],[7]or[8]. The
[3] selection is factory set and recommended for most users.
HDD Ports Activity : Enabled
VGA Activity : Disabled
IRQ3 (COM 2) : Enabled
IRQ4 (COM 1) : Enabled
IRQ5 (LPT 2) : Enabled
IRQ6 (Floppy Disk) : Enabled
IRQ7 (LPT 1) : Enabled
IRQ3 (RTC Alarm) : Disabled
IRQ9 (IRQ2 Redir) : Enabled
IRQ10 (COM 4) : Enabled
IRQ11 (COM 3) : Enabled
IRQ12 (PS/2 Mouse) : Enabled
IRQ13 (Coprocessor) : Enabled
IRQ14 (Hard Disk) : Enabled
IRQ15 (Reserved) : Enabled
ESC: Quit :Select Item
F1 : Help PU/PD/+/- :Modify
F5 : Old Values (Shift)F2 :Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
ROM PCI/ISA BIOS(2A5IIU1C)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management : Disabled
PM Control by APM : Yes
Video Off Option : Always on
Video Off method : DPMS Supported
Doze Speed (div by) : 2
Stdby Speed (div by) : 3
Suspend Option : Static Suspend
MODEM Use IRQ : 3
FAN Control : Disabled
**PM Timers**
HDD Off After : Disabled
Doze Mode : Disabled
Standby Mode : Disabled
Suspend Mode : Disabled
**PM Events**
COM Ports Activity : Enabled
LPT Ports Activity : Enabled
4. POWER MANAGEMENT SETUP
5-2 System Parameters