Digital Equipment Pro-Face PL-6700 43 Series, User Manual, Page: 39 / 97

PL-6700 43 Series User’s Manual 3-8
Chapter 3 -
Installing Optional Units and
Expansion Boards
5) Reattach the connection cable to
the PL-HD100’s connector (See
note below).
4) Detach the PL-HD000’s connection
cable from the unit.
6) Secure the HDD unit in place with
its 2 attachment screws.
7) Fold the HDD’s cable so that it
looks like the picture, and insert
the folded cable’s end into the
HDD’s holder slot.
• Be sure that the cable is
not pinched by either
the PL’s chassis or the
attachment screws.
PL- HD000
Attach the Main
Board connector
carefully
Connect to the
PL-HD100
HDD Connector
Cable
• Be sure not to bend any
of the HDD’s connector
pins while removing the
cable’s connector.
Do not use
these pins
<Figure 1 - PL-HD100 Connector>
Cable Inversion Prevention Pin (Removed)
Connect the
cable here
Caution
If the hard disk unit’s connector is attached incorrectly, there is a possibility of damage to the unit.
Please follow the instructions given here carefully.
X X
Be sure the hard disk unit cable’s main board connector is not skewed from its correct attachment
position (see above examples). Incorrect attachment can cause damage to the unit.
!!!!!
Important
!!!!!
Important
3-2 Available Options and Expansion Boards
!!!!!