Digital Equipment Pro-Face PL-6700 43 Series, User Manual, Page: 34 / 97

PL-6700 43 Series User’s Manual 3-3
Chapter 3 -
Installing Optional Units and
Expansion Boards
WARNING
• Use a screw driver to loosen or tighten the screws. Be careful
not to over-tighten any screws, since it may damage the
equipment.
• Be careful when removing or inserting any screws inside the
body of the PL.
• Be sure to remove the support “leg” when placing the PL into
a panel or cabinet, since this could damage either the leg, the
PL or the panel.
In order to perform development using the PL-6700, an additional “leg” (sup-
port) is supplied with the unit to stabilize it when placing it on a table top (i.e.
when the unit is not mounted in a panel), due to the irregular shape of the unit’s
chassis. The procedure for attaching this leg is described below.
1) Attach the support leg to the PL’s
chassis, as shown here.
To avoid electric hazards, be sure to turn the PL’s power
OFF before installing any optional units or expansion
boards.
3-2 Available Options and Expansion Boards
3-2
Installing Options and Expansion Boards
!!!!!
Important
1. Attaching the PL’s Support
!!!!!
Important