Digital Equipment Pro-Face PL-6700 43 Series, User Manual

Page: 47 / 97

Chapter 4 - Specifications
PL-6700 43 Series User’s Manual 4-4
Attachment hole
Top and Bottom
Faces
Left and
Right sides
Side panel
Mounting panel
• Be sure that the panel’s viewing angle is tilted no more than 30 degrees
from parallel to the operator (i.e. operator is directly in front).
Must be 30 degrees or less Must be 30 degrees or less Must be 30 degrees or less Must be 30 degrees or less Must be 30 degrees or less
OK
OK OK
Note:
• Avoid placing the PL next to other devices that might cause overheating.
• Avoid using the PL where the ambient temperature will exceed 40°C.
• Keep the PL away from arc-generating devices such as magnetic switches
and non-fuse breakers.
• Avoid using the PL in environments where corrosive gases are present.
Insert the PL into the installation slot
Attach and Secure the Rear Attachment Brackets
1) Locate the PL’s eight (8) attachment holes, located on the top, bottom,
and sides of the PL.
4-2 Installing the PL