background image

Preface

PL-6700 43 Series User’s Manual

xii

The PL-6700 series displays are equipped with the following features:

 The Latest, High-Performance Architecture

Designed around the MMX Pentium

®

200(MHz) CPU, the PL utilizes the

type of high performance architecture that offers you superior compatibility.
Add to this unrivalled support of the Windows

®

95 / NT

®

 and other operating

systems.

 Bright 12.1" LCD  with a Wide Viewing Angle

The PL’s large 12.1-inch 800 x 600 dot LCD display is available with TFT
color, offering excellent visibility and brightness.

• Digital’s top of the line TFT color LCD model allows you to create detailed

and powerful visual images, with excellent brightness, a wide viewing
angle, and a display capable of 260,000 colors.

 Easy Front Panel Installation

The PL is designed to be installed easily into the front of any panel or
device.  It is also rugged enough for use in harsh, industrial environments,
such as those found in the factory automation industries and boasts an IP65f
rating.

 High Resolution, Analog-Resistance-Film Touch Panel

Standard equipment with the PL is a high resolution 1024

 × 

1024 touch

panel.  Also, the WindowsNT

®

 4.0 / Windows

®

 95 mouse emulation utilities

provide mouse-like functionality and pointer control.

 Highly Expandable

For the easy enhancement of your PL unit, 4 ISA-bus expansion slots are
provided. (2 PCI slots are also available) These slots can accommodate both
Digital’s own optional boards as well as other commercially available
expansion boards.

Digital also offers a wide variety of optional products, such as an -5/-12V
DC power unit, DIM memory modules, etc. to name just a few.

Note:

New PL-6700 Features

New PL-6700 Features

Summary of Contents for Pro-Face PL-6700 43 Series


































































































Reviews: