PL-6700 43 Series User’s Manual
3-5
Chapter 3 -
Installing Optional Units and
Expansion Boards
5) Position the module so that its con-
tacts are directly in front of the DIM
socket and tilted up slightly.
7) Push the module slowly but firmly into
the socket, until the module’s clips lock
in place.
6) Then, tilt the module down so that the
module and socket’s contacts are par-
allel.
Push
here
Alignment
Slots
• Be sure to only push
on the points shown
here. Pushing on any
other point may cause
the module to break.
[To Remove the DIM Module]
When removing the module from the socket, please spread the socket’s sides as shown.
4) Position the module so that its align-
ment slot and the DIM module’s
alignment slot are aligned.
!!!!!
Important
3-2 Available Options and Expansion Boards
8) After the DIM module is inserted into
its socket, reattach the rear mainte-
nance cover, half cover and secure
them in place.
Summary of Contents for Pro-Face PL-6700 43 Series
