Digital Equipment PRIORIS ZX 5000 MP, User Manual, Page: 89 / 169

Expanding Your Server
3-44
Installing a Full-Height 5¼-Inch Device
into the Top-Right Drive Bay
To install a full-height 5¼-inch device into the top-right drive bay slots,
perform the following:
1. Turn off your server.
2. Disconnect external devices, ac power, and monitor power.
3. Unlock and remove side panels.
4. Unlock and open door.
5. Remove both plastic filler panels by pushing them out from inside
server.
6. Remove bottom brackets from inside of drive bay and attach them
to device.
7. Remove divider bracket from right side of drive bay (A, Figure 3-
19).
8. Insert device into drive bay from front.
9. Secure device to chassis using supplied mounting screws. (B, Fig-
ure
3-19).
10. Replace plastic filler panels.
Refer to “Connecting SCSI Devices” later in this Chapter.