Digital Equipment PRIORIS ZX 5000 MP, User Manual

Page: 34 / 169

Server Utilities
2-6
Starting and Using the SCU
To start and run the SCU:
1. Turn on your server and allow the POST to complete.
If POST detects an error refer to Appendix B, “Server Messages,”
and take the appropriate steps to correct the problem. After the
problem has been resolved, restart the server.
2. Start the SCU from the DOS partition or insert the SCU diskette
into drive A and soft boot (reset) your server.
3. From the MS-DOS Startup menu select one of the following:
1. Execute AMISCU
2. Execute AMISCU (baseboard configuration only)
3. Execute AMISCU using the Overlay Lite
4. When the SCU title appears, press any key to continue.
Afterwards, follow the instructions on your screen to access the
SCU main menu.
5. From the main menu, press the up or down arrow to highlight an
item and then press [Enter] to select it. If you are using a mouse,
point to an item and double-click the left button to select it. Press
[F1] at any time for help about a selection.
If you need additional information about configuring your server,
select “Step 1: About System Configuration.”