Digital Equipment PRIORIS ZX 5000 MP, User Manual

Page: 164 / 169

Caring For Your Server
D-2
Cleaning the Mouse
If your mouse cursor moves erratically across the screen, the ball on the
bottom of the mouse is probably dirty.
Perform the following steps to clean a mouse ball:
1. Turn the mouse over and release the ball cover.
2. Place the mouse cover and ball on a clean surface.
3. Lightly dampen a cotton swab with a mild detergent, and clean the ball
and the inside of the mouse.
4. Replace the ball and mouse ball cover.
Moving the Server
Perform the following steps before shipping or moving the server:
1. Back up all files stored on all hard disk drives.
2. Turn off the server (the monitor automatically shuts off).
3. Disconnect the power cord from the wall outlet, then from the back
of the server.
3. Disconnect the monitor cable from the back of the server.
4. Disconnect the keyboard cable from the back of the server.
6. Disconnect the mouse cable from the back of the server.
7. Disconnect any other external peripheral devices, such as printers
and modems.
8. Insert a drive protection card in all 5¼-inch and 3½-inch diskette
drives (if applicable). If you do not have drive protection cards, use
blank diskettes.
9. Package the server as described in the following section, “Packing
the Server.”