Installation
9FX Vision 330 (PCI) Graphics Option 2–11
_____________________ Note ______________________
For the Windows NT operating system, you must install the
graphics option in a slot that is located in front of the PCI-to-PCI
bridge. Refer to your system owner’s guide for information about
graphics option slots.
________________________________________________
5. Grasp the top edge of the graphics option and carefully insert it into the
slot, then firmly seat it.
6. Secure the module retaining bracket.
7. Replace the computer cover.
8. Ensure that the monitor cable is connected to the video output
connector located on the back of the graphics option.